Binatone Router Login | How To Perform It [Complete Guide] 

In this article, you will explore the technical know-how of Binatone Routers. Read on to discover how to open the Binatone Router Login Page, perform a basic set-up, and modify your router’s attributes. We will also mention some famous router models from Binatone along with their default login details. At the end of this article, you will find some tips to do away with many router troubles. So, follow along for a complete guide to oversee most of your router’s working levers and issues that may arise. 

See also: How To Perform Linksys Router Login? [Complete Guide]

 

How To Know Your Router’s IP Address 

 

To do so, check the router’s backside to see if there is any information given about the default credentials and IP address

Usually, the router brand mentions such details on the router itself. If they do not, open cmd (Command Prompt) from your computer’s Start menu and enter ‘ipconfig.’ 

The prompt will display the networking status of the device in use. Scroll towards the bottom and find the header called ‘Default Gateway.’ The router’s IP address, a set of four number combinations separated by dots, will be right in front of this header. 

Initial IPs for Binatone Routers majorly are as given here: 

  • 192.168.0.1 
  • 192.168.1.1
  • 192.168.1.2   

See also: 192.168.251.1 Router Login and Troubleshoot Guide

 

Navigating Binatone Router Login Page

 

In a browser of your choice, feed the IP address in place of the URL. This will fly you to the required page. 

 

Binatone router login
Binatone router login

 

The resulting interface will ask you for some login details.

 

Enter login credentials
Enter login credentials

 

They are mostly going to be what router companies generally set by default. You may try them from here: 

  

  • Username – admin

 Password – admin

 

  • Username – admin

 Password – (blank)

 

  • Username – (blank)

 Password – admin

 

These combinations should give you access to router controls. Alternatively, if you had set a new set of passcodes in the past and do not remember it now, there is still a way to reset them. 

See also: How To Do Orbi Admin Login? [Full Guide]

 

How To Reset Binatone Router’s Login Credentials? 

 

If neither of the combinations you have tried so far work, now it is time to reset.

  • Locate the power switch of your router, which will usually be at the rear side.
Reset Button
Reset Button

 

  • Press it for approximately 20 seconds to activate the factory reset (you might need a sharp object to keep the button compressed). 

 

Press and hold
Press and hold

 

Once the router has undergone a factory reset, you can enter a custom username and password. Now, you can apply these new credentials on your Binatone router login page. 

See also: Quick Fixes To Solve Netgear Router Orange Internet Light Issue

 

How To Tweak Your Binatone Router’s Attributes The Way You Want? 

 

Some changes you are in control of after Binatone router login are: 

  1. Wi-Fi’s Name and Password 
  2. Default IP Address 
  3. Wi-Fi Security
  4. Connection Mode 

 

  • To change your Wi-Fi’s name, go to the Binatone router login page, log in, then go to Network > WLAN > Security Settings. In the text field with the header SSID, you can type in your desired Wi-Fi name. Also, check the ‘Enable SSID’ checkbox underneath. 
  • To change the password that you use to connect your Wi-Fi to other devices, head over to Network > WLAN > Security Settings again. The WPA Key header will show the password for your Wi-Fi. You must change it every six months to ensure that your network stays secure. 
  • For Wi-Fi Security, choose WPA2-PSK as the ‘Encrypt-Type’ (WPA2-PSK is the highest recommended security for routers). 
  • For Using a PPPoE Connection, the Binatone router control panel also lets you access the Internet through an Ethernet cable if you want to use a physical mode instead of being wireless. Locate Network > Broadband Settings > Internet Settings on the Binatone router login page. After that, choose PPPoE (Point-to-Point Protocol over Ethernet) as the Link Type. Enter the PPPoE Account and Password usually supplied by your Internet Service Provider (ISP). Click on Apply, and you are ready to use the Internet, forming a chain of devices connected physically to the router.

 See also: Xiaomi / Mi Router Login – A Complete Guide

 

Some Famous Binatone Routers And Their Login Details 

 

These will help you quickly access which combinations to use on the Binatone router login interface. 

  

  •  Model Name – DT850W

 Username  – admin

 Password – password

 

  • Model Name – ADSL2000 

 Username  – Admin

 Password – (blank)

 

  • Model Name – ADSL2001 

 Username  – Admin

 Password – (blank)

 

  • Model Name – WR1500N 

 Username  – admin

 Password – admin

 

  • Model Name – WR1500N2 

 Username  – admin

 Password – admin

 

  • Model Name – WR3010N

 Username  – admin

 Password – admin

 

See also: 200.200.200.5 Admin Login, Username And Password

 

How To Deal With Basic Router Errors?

 

Most of the router errors affect network speed majorly, and there are many reasons why that might be happening. 

  1. Avoid devices communicating with similar bandwidths to avoid interference with the actual Wi-Fi signal. This results in a slower connection otherwise. Wi-Fis have a 2.4 GHz bandwidth to communicate. So, all other devices which work around similar bandwidths cause problems for Wi-Fi signals. 
  2. For random glitches where you lose your connection entirely, try rebooting the router using the restart button at its back. 
  3. Give the router enough space to breathe. Yes, routers exhale the heat to prevent overheating. Overheating does not only affect the network speed but also damages the router’s machinery in the long run. 
  4. Keep checking your router’s official website so that you do not miss any important firmware updates. Not upgrading might leave your router’s software outdated and incompetent to deal with dynamically changing network ranges. This might result in slow connections or no connectivity at all. 
  5. Device-Overload is another reason your router is giving a slow Wi-Fi connection. To avoid unnecessary devices from joining your network, change the Wi-Fi password every once in a while. This will restore your security in case you accidentally leaked your password.

See also: Cisco Router Login – A Complete Guide

 

Conclusion 

 

Above, we have given you a full walkthrough of how to access the Binatone Router Login Page and play with various settings of the router to suit your needs. You can keep this guide handy if you ever want to know your router’s IP address or want to go to the Binatone Router Login page or any other router’s. This will help you set your own passwords, usernames, and connectivity modes. Not only will it leave you more in control and organized but also more secure. We hope that by now, the reader has surely become a Router Pro and our guide earned some brownie points.

See also: 7 Ways To Maximize Your Home Network Security

         

Leave a Comment