192.168.1.200 is the default industry standard login IP reserved for wireless routers, modems, or any other network devices that are produced by the manufacturer ‘D-Link.’ The 192.168.1.200 IP address is a part of the 192.168.0.0/16 network, which is a Class C private IP address block. The most common use case of this address block is the setting up of a private home network. You might need to change the network devices’ settings for some reason, and for that, you need to access its admin console. Read on to find out how to login to this private IP address.
How To Login Into 192.168.1.200
To login to the private IP address of 192.168.1.200, you need to have the default username and password. They can be found on the back of the router around the area where the IP is written.Further, this article provides some of the usual combinations of usernames and passwords for logging into the IP.
To log in to 192.168.1.200 , open the web browser of your choice, type ‘http://192.168.1.200’ into the address bar, and press enter. Make sure that you type in the correct IP address (provided at the back of the networking device); otherwise, you won’t get to the login page. After pressing enter, the login page opens up, and here you need to enter the username and password in order to gain access to the console of the device. The following are the common combinations of username and password used for logging into this 192.168.1.200
While logging into 192.168.1.200 IP address to make changes to the private network, it is a good idea to do it over a wired connection so as to circumvent the risk of being logged off after pressing the ‘Save’ button.
See also:https://routerlogin.app/192-168-1-2/
What you need to do if You Forget The Router’s Username And Password
If you are unable to login into 192.168.1.200 IP address, then this usually means that you are entering an incorrect username or password. In this case, try the hard resetting method.
- To do this, first, locate the reset button at the back of the router, it will be really small. You might need something like a pin or a paperclip to fit into the hole.
- Make sure that the router is plugged in. Next, press and hold the reset button for around 10-15 seconds. You need to wait for the router to power on after you release the reset button. This will ensure that your router is reset to its factory settings – how it came from the manufacturer.
- Now try to login into 192.168.1.200 using the default username and password, and you should be successful.
A note here is to only reset your router if you have exhausted all means of trying to log in to 192.168.1.200 because once you reset it, all the settings you created, all the changes you made, all the controls you applied will be deleted forever and you’ll need to make those changes again.
See also:https://routerlogin.app/192-168-1-13/
List Of Routers Using 192.168.1.200 IP address
- D-Link DWL-7200AP
Default username: admin
Default password: blank
- D-Link DAP-1150
Default username: admin
Default password: blank
- D-Link DWL-AG700AP
Default username: admin
Default password: blank
- D-Link DAP-1555
Default username: admin
Default password: blank
D-Link DAP-1555
- D-Link DAP-1155
Default username: admin
Default password: blank
- D-Link DWL-7000AP
Default username: admin
Default password: blank
- D-Link DAP-1650 rev A1
Default username: Admin
Default password: blank
- D-Link DAP-1665 rev A1
Default username: admin
Default password: blank
See also:https://routerlogin.app/dlink-router-login/
How To Troubleshoot Router Errors?
- There might be certain times when the router login page won’t load. If this is the case, then you need to first make sure that the device you are currently using is connected to the WiFi. Also, check the default IP address for 192.168.1.200.Moreover, if the IP address of the wrong router is set as the default address, then that could be what is causing the problem.
- If, while browsing, you are having issues with speed (pages loading slowly or not loading at all), then that usually means that your network is using an incorrect IP address. However, you need to then locate the correct IP address for 192.168.1.200 and set it as default.
- Sometimes routers enforce a limit of the maximum number of devices connected to it (clients). Once you reach this limit, you might face difficulties connecting to that router. In this case, disconnect the devices that don’t need access to the Internet and try again.
Know More: 192.168.11.1 Router Login Guide, Username & Password
Conclusion
The 192.168.1.200 IP address is a default gateway IP. You can log in to the networking device with this IP address you will need the username and password and enter this IP address in the web browser on a device connected to that router. Above all, take care while resetting the router settings as you can lose all the changes you made to the router.
See Also: 10.90.90.90 IP Address Login Guide
Seth Myers is a 26-year-old hardware expert who enjoys badminton, cycling and watching television. He is kind and fun, but can also be very hardworking and a bit lazy. In his free time he loves binge-watching boxed sets.